Ceramic Intalox Saddle Acid Resistance

Ceramic Intalox saddle 1.Excellent Acid Resistance and Heat Resistance 2.ISO 9001:2008 3.20 years professional manufacture

Ceramic Intalox Saddle Acid Resistance

Ceramic saddle has excellent acid resistance and heat resistance. It can resist to corrosion of various inorganic acids, organic acids and organic solvents except hydrofluoric acid, and can be used in high or low temperature conditions. Consequently the application range is very wide. It can be used in the drying columns, absorbing columns, cooling towers, scrubbing towers and actifier columns in chemical industry, metallurgy industry, coal gas industry, oxygen producing industry, etc.

 

Chemical composition

SiO2	Al2O3	Fe2O3	CaO	K2O+Na2O
>70%	23-30%	<1%	<1-2%	<2-4%

  

Physical properties

Index	Value
Specific gravity(g/cm3)	2.25-2.35
Water absorption(%)	<0.5
Acid-resisting strength, %Wt. Loss (ASTMc279)	<4
Firing temperature()	1280-1320
Softening point()	>1400
Density(kg/m3)	2350

 Technical data

Spec. (inch)	Spec. (mm)	Approx. weight (kg/m3)	Surface area (m²/m³)	Free volume (%)	Packing factor (l/ft)
1/2	12	720	623	71.7	200
3/4	19	688	334	73	130
1	25	688	253	73	85
1.5	38	640	164	75	50
2	50	577	115	77.4	37
3	76	623	92	75.5	24

  

AdvantagesThese saddles are made from chemical porcelain and have excellent resistance to acids except in the case of hydrofluoric acid.Moisture absorption must less than half a percent.The porcelains specific gravity is 2.3-2.4g/cm3 and an average heat capacity (between 20 and 500 of 0.22 cal/g.)XINGFENG ceramic saddles softening point is 1400 min. And they show good thermal shock resistance during repeated cycling between 20 and 820 . Thermal shock test for Intalox SaddlesFor example shipping the saddles over 80 M3:1) Randomly pick 100-200 pieces of ceramic saddles for RTOs from the batch or shipment2) For each sample selected, heat it up to 820 and maintain them at this temperature for 30 minutes.3) Drop the hot pieces into cold 20 water4) Repeat steps 2 & 3 for10 times on each and every piece in the sample lot. 5) Examine the pieces and count the percent that show clear signs of breakage and/or cracking. Our standard is less than seven (7%) percent.

Ceramic Intalox Saddle Acid Resistance