25,38,50,76mm Plastic Intalox Saddle

Plastic Intalox Saddle 25,38,50,76mm 1) 20 years professional manufacturer 2) Size: 25,38,50,76mmetc 3) Material:PP,PE,PVC

Plastic Intalox Saddle 25,38,50,76mm

 Plastic Intalox Saddles Packing is made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60 Degree C to 150 Degree C. For these reasons it is widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc.

Physical & Chemical properties of plastic tower packing

Performance / Material	PE	PP	RPP	PVC	CPVC	PVDF
Density (kg/m3)	0.94-0.96	0.89-0.91	0.93-0.94	1.32-1.44	1.50-1.54	1.75-1.78
Operation Temp.(Degree C)	90	>100	>120	>60	>90	>150
Chemical corrosion resistance	Good	Good	Good	Good	Good	Good
Compression Strength(Mpa)	>6.0	>6.5	>7.0	>6.0	>8.0	>10.

Specification

Type	D*H*T	Surface Area m2/m3	Void Volume m3/m3	Bulk number per m3	Bulk Density kg/m3	F factor m -1
Dg25	25*12.5*1.2	288	0.847	97680	102	473
Dg38	38*19*1.2	265	0.95	25200	63	405
Dg50	50*25*1.5	250	0.96	9400	75.2	332
Dg76	76*38*2.6	200	0.97	3700	59.2	289

  

25,38,50,76mm Plastic Intalox Saddle